Orbital cutter
RS MULTICUT OC-30 NG, OC-70 NG
RS MULTICUT OC-30 NG, OC-70 NG Keyfacts
The orbital cutter RS MULTICUT OC-NG is suitable for semi-hard and hard pipes with a diameter of 5 to 70 mm.
The system is characterized by a clean, chip-free and right-angled cut and is used for precise and fast cutting of semi-hard and hard pipes made of plastic, rubber, plastic composite with aluminum, copper pipe inside, rubber with Kevlar, etc. The cut is done on the fly.
Thanks to a standard servo linear drive for the tool carrier, the moving cutting unit achieves excellent cutting quality and, at the same time, extremely short cycle times of around 1-2 seconds for processing high line speeds.
All important cutting parameters can be adjusted in the control during the process and optimized according to requirements. The new OC NG extrusion downstream machine is offered in the usual quality, but now at a particularly attractive price. This model is also available as high speed version OC NG HS.
A revolutionary cutting system instead of saws, guillotines etc.
Delivery of special machines on request. Subject to technical modifications.
OC machine components
OC-30 NG
| Product diameter: |
max. Ø 29 mm |
| Product speed: | max. 12 m/min. |
| Cutting performance: | max. 25 cuts/min.* |
| Number of orbital rotations: | 3 per cut |
| Cutting motor: | Servo drive |
| Material thickness: | 6,00 mm max. |
| Operation of the blade: | mechanically by gear motor drive |
| Connection values: | 3~400 VAC, 50/60 Hz, 16 A |
| Control: | Siemens S7 |
| Used administration: | Standard |
| Line hight: |
1100 mm ±50 mm |
| Dimensions: | L 1200 mm / D 600 mm / H 1400 mm |
| Weight: | ca. 282 kg |
OC-30 NG HS
| Product diameter: |
max. Ø 29 mm |
| Product speed: | max. 20 m/min. |
| Cutting performance: | max. 50 cuts/min.* |
| Number of orbital rotations: | 3 per cut |
| Cutting motor: | Servo drive |
| Material thickness: | 6,00 mm max. |
| Operation of the blade: | mechanically by gear motor drive |
| Connection values: | 3~400 VAC, 50/60 Hz, 16 A |
| Control: | Siemens S7 |
| Used administration: | Standard |
| Line hight: |
1100 mm ±50 mm |
| Dimensions: | L 1200 mm / D 600 mm / H 1400 mm |
| Weight: | ca. 303 kg |
OC-70 NG
| Product diameter: |
max. Ø 69 mm |
| Product speed: | max. 12 m/min. |
| Cutting performance: | max. 25 cuts/min.* |
| Number of orbital rotations: | 3 per cut |
| Cutting motor: | Servo drive |
| Material thickness: | 6,00 mm max. |
| Operation of the blade: | mechanically by gear motor drive |
| Connection values: | 3~400 VAC, 50/60 Hz, 16 A |
| Control: | Siemens S7 |
| Used administration: | Standard |
| Line hight: |
1100 mm ±50 mm |
| Dimensions: | L 1200 mm / D 600 mm / H 1400 mm |
| Weight: | ca. 313 kg |
OC-70 NG HS
| Product diameter: |
max. Ø 69 mm |
| Product speed: | max. 20 m/min. |
| Cutting performance: | max. 50 cuts/min.* |
| Number of orbital rotations: | 3 per cut |
| Cutting motor: | Servo drive |
| Material thickness: | 6,00 mm max. |
| Operation of the blade: | mechanically by gear motor drive |
| Connection values: | 3~400 VAC, 50/60 Hz, 16 A |
| Control: | Siemens S7 |
| Used administration: | Standard |
| Line hight: |
1100 mm ±50 mm |
| Dimensions: | L 1200 mm / D 600 mm / H 1400 mm |
| Weight: | ca. 332 kg |